English

Cibiyar Samfura

LABARI NA FR A2 CORE PRODUCTION HOTOMAI AKA FITO DA SHI
  • LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC
  • LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC
  • LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC
  • LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC

LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC

Takaitaccen Bayani:

A cikin wannan layin samarwa, ana haɗa foda mara tsari, ana juyawa kuma ana fitar da shi zuwa wani abu mai laushi kamar faranti, kuma farantin tsakiya yana da siffa ta hanyar dumama, fitarwa da sanyaya daban-daban ta hanyar tsarin watsawa mai sassauƙa. Kayan tsakiya kayan asali ne na A2 wanda ba zai iya ƙonewa ba, wanda zai iya maye gurbin kayan PE gaba ɗaya. Ana iya haɗa kayan asali tare da zanen ƙarfe na sama da na ƙasa don ƙirƙirar allon haɗin gwiwa mai hana wuta ta hanyar tsari na musamman, wanda ya dace da sabon salon gine-gine da kayan ado na duniya, kuma sabon zaɓi ne don gine-gine da kayan ado na zamani.


Cikakken Bayani game da Samfurin

Alamun Samfura

LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC02
LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC03

Babban Bayanan Fasaha na Inji

1. Kayan da aka sarrafa
Kariyar muhalli FR foda mara halitta da ruwa na musamman mai narkewa Manne da Ruwa: Mg(oh)2/Caco3/SiO2 da sauran foda mara halittasinadaran da kuma manne na ruwa na musamman da za a iya miscible da kuma wani kaso na ruwa don cikakkun bayanai na dabara.

Fim ɗin yadi mara sakawa: Faɗi: 830~1,750mm
Kauri: 0.03~0.05mm
Nauyin nada: 40~60kg/nada

Sharhi: Da farko a fara da yadudduka 4 na fim ɗin yadi marasa sakawa sannan a sama a kan yadudduka 2 sannan a ƙasa a kan yadudduka 2, kuma za a mayar da layuka 2 daga cikinsu bayan an kai tsakiyar zuwa tanda, kuma a ƙarshe sauran layuka 2 za su manne a tsakiyar bayan sun narke.

LAYIN SAMUN FR A2 CORE 1

2. An gama haɗa allon
Faɗi: 800-1600mm.
Kauri: 2.0~5.0mm.
Saurin samarwa: 1200~2000mm/min (Yawanci don 1800mm/min).
Lissafi bisa ga: faɗin 1240mm*(3~4mm) (daidaita gwargwadon kauri na samfurin); kayan aiki/tsarin/dabaru/ƙwarewar samarwa/ƙwarewar aiki na iya yin tasiri ga saurin samarwa.

3. Bukatar ruwan sanyaya layin samarwa (sake amfani da shi)
Q= 0.5-1.5M3/H; P=Yawanci ga 0.7KG/CM2, (ƙirƙira ga 0.5~2kg/cm2).
Zafin shigarwa T1: ≤20℃, ≥0.3Mpa, tauri: 5-8odH.
Ana amfani da shi galibi don haɗa foda da haɗar dabarar da sake amfani da ruwa da sanyaya AC da kuma tsaftace sassan gaba na injin da sauran ƙaramin adadin aikace-aikacen birki na maganadisu na recoiler.

LAYIN SAMUN FR A2 CORE NA 2

4. Jimlar amfani da makamashi: (230/400V)/mataki na 3/50HZ.
Samar da Wutar Lantarki: Ƙarfin da aka shigar don ajin FRA2: 240kw (ainihin yawan amfani da makamashi kusan 145kw).
Yanayin aiki na kabad ɗin lantarki: zafin jiki & zafi ≤35℃, ≤95%.
Iskar gas: Gabaɗaya ga murhu 6 da kuma kusan 110M3/H don buƙatar iskar gas (LPG ko LNG), matsakaicin 78M3/H.

LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC034

5. Jimlar girman iskar da aka matsa
Q=0.5~1m3/min P=0.6~0.8Mpa
Amfani da Iska: Nau'in matse iska mai tankin ajiya na iska ≥1m3 da injin ≥11KW

LAYIN SAMFURIN FR A2 CORE NA AUTOMATIC04

6. Girman na'urar
Tsawon* faɗin* tsayi (m): 85m*9m*8.5m (Dandalin gaban injin na tsawon mita 8.5)
Jimlar nauyi (kimanin): tan 90
Girman masana'anta (shawara)
Tsawon * faɗi (m): 100*16
Crane: ƙarfin ɗagawa tan 5

  • Na baya:
  • Na gaba:
    • Rubuta saƙonka a nan ka aika mana da shi

    Mai alaƙaKAYAN AIKI

    Danna Shigar don bincike ko ESC don rufewa